Choose the finish your water needs.
Sectional panel tanks bolted from 1 m and 4 ft panels, from general-purpose steel to food-grade stainless.
Request a quote- RORed oxide primer
General purpose
Standard Primer Coated5 mm steel - ZNHot-dip zinc
Fire fighting
Hot Dipped Galvanised5 mm steel - HD2.0 mm HDPE geomembrane
Corrosive water
HDG + HDPE Lined5 mm steel + 2.0 mm liner - EPTwo-pack epoxy, 125 µm
Non-potable liquids
Galvanised Epoxy Coated5 mm steel - FRMoulded fibreglass, anti-skid studs
Potable water
SMC / FRP2.5 mm panels - SSPressed stainless steel
Food grade
Stainless Steel 304 / 316L2.5 mm panels
Same panel. Six protections.
Every range is a rectangular tank assembled on site from hydraulically pressed, flanged, bolted panels. What changes is the panel material and its protection.
| Finish | Range | Panel finish | Best for | Thickness |
|---|---|---|---|---|
| Standard Primer Coated | Red oxide primer | Basic, economical general-purpose storage | 5 mm steel | |
| Hot Dipped Galvanised | Hot-dip zinc | AC make-up water, fire fighting, non-food production | 5 mm steel | |
| HDG + HDPE Lined | 2.0 mm HDPE geomembrane | Highly corrosive water or liquids | 5 mm steel + 2.0 mm liner | |
| Galvanised Epoxy Coated | Two-pack epoxy, 125 µm | Water or non-potable liquids needing double protection | 5 mm steel | |
| SMC / FRP | Moulded fibreglass, anti-skid studs | Potable water, hygienic and food-related industries | 2.5 mm panels | |
| Stainless Steel 304 / 316L | Pressed stainless steel | Food-grade storage; corrosive water or environments | 2.5 mm panels |
Size it in panels.
Pick a range and a height, then mark the plan on the panel grid. Capacities come straight from the published tables; anything off the grid is a custom tank.
Standard size
6,100 × 4,880 mm · 8 ft (2440 mm)
72,736 L
Nominal capacity · 16,000 imp. gallons
Plan size, in panels5 × 4
Dots mark published sizes
Already have a tank? Line it. Refurbish it.
Sectional and reinforced concrete tanks age from the inside. Inspection, cleaning, HDPE or stainless steel lining and recoating cost far less than a replacement.
What we find
- Corrosion attack on tank walls and internal equipment
- Contaminant, sludge and dirt deposition
If left untreated
- Contaminated water and disrupted supply
- Corrosion of internal surfaces and equipment
- The high cost of replacing the tank
After the work
- Corrosion-free and toxic-free storage
- A good, clean water supply
- Savings on replacing the tank and related works
Warranty of 2 to 10 years on lining and service work, by mutual agreement. Annual service contracts available.
Around the tank.
Beyond the tank itself: the parts, the structure it stands on, and the work that keeps it in service.
- Inspection, refurbishment and maintenanceRefurbishment of existing sectional or R.C. tanks with the most appropriate, cost-effective plan, plus annual service contracts. Warranty 2 to 10 years by mutual agreement.
- Lining installationHDPE and stainless steel lining of steel and R.C. tanks, with drawings, estimating support and warranty.
- Fittings, connections and componentsEverything a sectional or concrete tank needs, in various sizes.
- Steel towers and tank supportsDesign, fabrication and erection of structural steel towers and tank supports.
- Custom tank fabricationTanks designed and fabricated to the application, in the shapes and sizes a site needs for storage or effective use of space.
Tell us the water, the size and the site.
We reply with the right range, panel layout and a quotation. Send drawings if you have them.